Product data sheet

Epsylon-Wall Light



EPSYLON is the family of pole top and wall mount luminaires with unshielded symmetrical distribution. The recommended mounting height is between 3 – 5 meters. To avoid discolouration of the lens we have used a high quality PMMA clear cover. The diffuser gives a broad spread light distribution. These luminaires are generally used to illuminate gardens, parks, pedestrian, squares and open spaces. They are assembled with high brightness multiple LEDs. Aluminium pole, galvanized steel pole, pole adaptor and anchorage unit for concrete foundation are also available. • Designed, Manufactured and Tested according to IEC 60598-1, IEC 60598-2-1 and VDE regulations. • LM6 Die Cast Aluminium and Spun Aaluminium body. • Stainless steel screws. • Nano Ceramic surface conversion. • Double layer coating. • Clear PMMA diffuser. • Post-cured silicone gasket. • High quality LED module and driver. • GFR PA6.6 Terminal block. • M20 cable gland or TPE grommet. • Pole light pre-wired with outdoor cable. • Installation work has to be carried on according to the enclosed product manual. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x High pressure sodium vapour lamp 150 W 14500 lm 97 lm/W 1690 K 36
Epsylon-Wall Light

Epsylon-Wall Light 

Light output 1 

1 x High pressure sodium vapour lamp 

Mounting mode 

Wall mounted

Shape and measurements 

Length: 26.26 in

Width: 27.67 in

Height: 34.45 in




System power: 170 W

Appliance Class: I


IP: 54

IK: 06

Photometric data

ZIP file