Product data sheet

RUFO 490/6000-840 Z-RF-Pos4

0420796

RIDI

Diffuser luminaire Design: Single diffuser luminaire round, diameter 490 mm, with LED modules for ceiling or wall mounting. Circular, deep drawn rigid steel housing, white powder-coated. Sprung steel catches are used to fix the diffuser. Fitted with RIDI-LED modules. Rectangular LED modules mounted on the luminaire base and additionally on the cap profile bracket for homogenous illumination of the diffuser. LED modules with copper coating on both sides for optimum heat distribution. 2-channel design (...-2K) with two LED drivers per luminaire. Two LED circuits are each actuated by a driver, allowing separate switching (50/50), e.g. for night lighting. In versions with radar sensor (...-RS) one channel (50%) is switched to the sensor. Ten different resistances and ten different luminous flux levels can be set for the luminaires using an integrated flexible resistance (ResFlex). Electronic converter for LED, 220-240 Volt, 0/50-60 Hz and internal connector block 5x2.5mm². Suitable for direct voltage operation and use in central battery systems. Mounting: Direct ceiling or wall mounting without additional accessories. RUFO 490 … Z Flat cylindrical acrylic glass diffuser made of opal, UV-resistant PMMA. Satin finish on the diffuser surface. 

Lamp type Nominal lamp power Total flux Luminous efficacy CCT CRI
LED 21 W 2750 lm 131 lm/W 4000 K 80
RUFO 490/6000-840 Z-RF-Pos4

RUFO 490/6000-840 Z-RF-Pos4 

Light output 1 (integrated) 

LED 

Mounting mode 

Ceiling mounted

Shape and measurements 

Length: 20.12 in

Width: 18.19 in

Height: 3.82 in

Adjustability 

Fixed

Electric 

System power: 21 W

Protection 

IP: 20

Photometric data

ZIP file