产品资料

TORSTEN I FLS LED

9.001.9375.17

Leipziger Leuchten

产品图片 1: TORSTEN I FLS LED
产品图片 1: TORSTEN I FLS LED

产品图片 1: TORSTEN I FLS LED 

 

 

recom. pole height: 3,00m – 6,00m light standards: low and medium lighting requirements lamp: incl. 1 FLS LED module 4 ; easy to replace colour temperature: 3.000K warm white or 4.000K neutral white LED gear: electronic driver below the luminaire head, up to 100.000 hours, CLO mode LED life expectancy: up to 50.000 hours/ L100 light control: at extra cost: power reduction optical system: directed light (multi layer) provided by a lens technology; dark sky light distribution: depending on the chosen module: S oval wide beam A asymmetrical wide beam P symmetrical light distribution luminaire head: incl. canopy made of aluminium, TORSTEN I: ø 600mm, TORSTEN VIII: ø 750mm, with a special white, reflective underside finish; base made of corrosion-resistant cast aluminium with plate for driver; powder coated wall bracket: with wall shield made of hot dip galvanised steel; powder coated colour: RAL or DB glazing: PMMA RESIST, clear, high-impact resistant wiring: completely wired; via a plug and socket connector below the luminaire head; WL: via a plug and socket connector within the wall shield installation: for top entry ø 76mm only; WL: to be screwed to the wall accessory: cable, column, pole accessories, fixing material for the wall installation – to be ordered separately application areas: for parkways, boulevards, schools, home for elderly people, hotels, factory premises, residential and local distribution roads, paths, cycle lanes, squares, car parks, shopping center, pedestrian zones 

光源种类 额定光源功率 总光通量 光效 CCT CRI
LED 19瓦 1506 lm 79 lm/W 3000K 70
TORSTEN I FLS LED

TORSTEN I FLS LED 

光输出 1 (整合) 

LED 

安装方式 

杆顶式

形状和尺寸 

高: 550毫米

直径: 200毫米

重量: 8.9千克

可调性 

调整高度

电子 

系统功率: 19瓦

防护 

IP: 65