产品资料

andrea

121153115

FLOS

• Pole top luminaire for installation on pole or wall (by a wall mounting bracket). • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content) • The top cover in pre-galvanized sheet is secured to the housing by four extruded aluminium bracket. • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • The internal part of the top cover is painted in white for an enhanced light distribution. • Lamp housing in clear or opal acrylic 3mm thick. Silicone gaskets. 

现有设备 额定光源功率 光源光通量 光效 CCT CRI
1 x 金属卤素灯泡 70瓦 4900 lm 25 lm/W 4200K 98
andrea

andrea 

光输出1 

1 x 金属卤素灯泡 

安装方式 

杆顶式

形状和尺寸 

高: 560毫米

直径: 740毫米

可调性 

固定

电子 

系统功率: 70瓦

器具类: I

防护 

IP: 65

IK: 07

Photometric data

ZIP file