Scheda tecnica

pi led

509041

FLOS

• Spotlight for outdoor installation on wall, ceiling or floor. • Configuration: turned aluminium body ( EN AW 6060 ). 316L stainless steel fixing bracket and extra clear tempered glass with silk-screen finishing. Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Extra clear tempered glass with silkscreen border, fixed to the body by a double-sided tape. • Nickel-plated brass cable gland. 

Configurazioni disponibili Potenza nominale Flusso Emissione luminosa CCT CRI
1 x LED 5,1 W 408 lm 64 lm/W 6000 K 70
pi led

pi led 

Emissione luce 1 

1 x LED 

Tipo di montaggio 

Montaggio a parete

Forma e Dimensioni 

Lunghezza: 70 mm

Larghezza: 70 mm

Altezza: 70 mm

Regolazione 

Orientabile

Cablaggio / Dimming 

Potenza sistema: 5,9 W

Classe di protezione: III

Grado di protezione 

IP: 65

IK: 07

Photometric data

ZIP file