Welded body in stainless steel AISI 316L
with a thickness of 2 mm.
Finishing ring available in circular or square
version, in stainless steel AISI 316L, with a
thickness of 4 mm.
Stainless steel M4 socket-head screws.
12 mm thick diffuser in tempered, extra
clear, transparent or frosted glass.
O-ring gasket in rubber.
Metal halide HIT lamp, 35W and 70W, G12
TC-TEL compact fluorescent lamp, 42W,
Module with N°12 LEDs 1W/230V for
Module with N° 9 LEDs 3W/350mA for RGB
Full Colour versions.
Optical compartment available for fixed or
adjustable version (± 15° on the horizontal
axis and 355° on the vertical axis) with:
- aluminum optics available in narrow,
medium and wide angles;
- optics in PMMA with a beam spread of
10°, 25° and 40°.
Accessories for controlling and modulating
the light emission: honeycomb screen, antiglare
screen, ellipsoidal lens, ribbed glass and coloured glass filter.
M 20 cable gland suitable for cable Ø 8
- 13 mm.
Pre-wiring with 1 metre of H07RN8-F cable.
Quick coupling IP 68 for connection to the
Predisposition for through wiring.
Remote driver and DMX controller for
the versions with LED RGB module and
possibility of colour adjusting and control
by means of a four-button remote control
and touch screen panel.
Class II. Class III (with remote electronic driver).
4 mm thick PP-casing (polypropylene
casing) with side opening for power supply.
Stainless steel AISI 316 L counter-ring,
circular or square, for raised or flush