Scheda tecnica

yama led

531017

FLOS

• Outdoor cylindrical luminaire for installation on ceiling. • Configuration: extruded aluminium structure with die-cast aluminium fixing base and frame EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent glass mechanically glued to the frame and moulded silicone gasket 

Configurazioni disponibili Potenza nominale Flusso Emissione luminosa CCT CRI
1 x LED 16,5 W 1681 lm 81 lm/W 4000 K 80
yama led

yama led 

Emissione luce 1 

1 x LED 

Tipo di montaggio 

Montaggio a soffitto

Forma e Dimensioni 

Altezza: 170 mm

Diametro: 150 mm

Regolazione 

Fisso

Cablaggio / Dimming 

Potenza sistema: 20 W

Classe di protezione: I

Grado di protezione 

IP: 65

IK: 07

Photometric data

ZIP file