2 mm thick extruded stainless steel AISI 316L.
Finishing ring available in circular or
square version for raised or flush installation, in stainless steel AISI
316L, with a thickness of 3 mm and screw fastening system by
means of an apposite technopolymer key.
4 mm thick diffuser in tempered, extra clear, transparent or
O-ring rubber gasket.
Module with N°1 Led 4W/230V.
Module with N°3 LEDs 1W/350mA for
Module with N°1 Led 3W/350mA for RGB
Full Colour versions.
Optics in PMMA with a beam spread of
10°, 25° and 40°.
M 16 cable gland suitable for cable
Ø 5.5 - 10 mm.
Pre-wiring with 1 metre of H07RN8-F cable.
Quick lampholder IP 68 for connection to
the electrical network.
Predisposition for through wiring.
Remote driver and DMX controller for the
versions with LED RGB module and possibility of colour
adjusting and control by means of a four-button remote
control or touch screen panel.
Class II for version with integrated electronic driver.
Class III for version with remote electronic driver.
4 mm thick PP-casing (polypropylene
casing) with side opening for power
supply with stainless steel AISI 316L
counter-ring, circular or square, for raised
or flush installation.