1.5 mm thick extruded stainless steel AISI 316L.
Finishing ring available in circular or square
version for raised or flush installation, in
stainless steel AISI 316L, with a thickness
of 3 mm and screw fastening system by
means of an apposite technopolymer key.
4.5 mm thick diffuser in tempered, extra
clear, transparent or frosted glass.
O-ring rubber gasket.
QR-CBC 51 halogen lamp, max 45W, with
Mains-voltage halogen lamp PAR 16, max
35W, with GU 10 lampholder.
Module with N°1 Led 4W/230V.
Module with N°3 LEDs 1W/350mA for
Module with N°3 LEDs 3W/350mA for RGB
Full Colour versions.
Optics in PMMA with a beam spread of 10°,
25° and 40°. Accessories for controlling and
modulating the light emission: honeycomb
screen, ellipsoidal lens, ribbed glass and
coloured glass filters (for QR-CBC 51).
M 16 Cable gland suitable for cable Ø 5.5
- 10 mm.
Pre-wiring with 1 metre of H07RN8-F cable.
Quick coupling IP 68 for connection to the
Predisposition for through wiring.
Long version with integrated electronic
transformer for QR-CBC 51 halogen lamp
or LED driver.
Remote driver and DMX controller for
the versions with LED RGB module and
possibility of colour adjusting and control
by means of a four-button remote control
or touch screen panel.
Class II for version with integrated
electronic driver or mains voltage lamp.
Class III for version with remote electronic
4 mm thick PP-casing (polypropylene
casing) with side opening for power supply.
Stainless steel AISI 316L counter-ring, circular or square, for raised
or flush installation.