Scheda tecnica

paola

896114

FLOS

• Outdoor luminaire for installation on wall or on ceiling. • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent glass, pure aluminium optics, silicone gasket. • Glass fixed to the aluminium body through a robotic gluing system. 

Configurazioni disponibili Potenza nominale Flusso Emissione luminosa CCT CRI
1 x Fluorescente compatto 26 W 1800 lm 14 lm/W 3000 K 84
paola

paola 

Emissione luce 1 

1 x Fluorescente compatto 

Tipo di montaggio 

Montaggio a soffitto, Montaggio a parete

Forma e Dimensioni 

Lunghezza: 250 mm

Larghezza: 250 mm

Altezza: 90 mm

Regolazione 

Fisso

Cablaggio / Dimming 

Potenza sistema: 26 W

Classe di protezione: I

Grado di protezione 

IP: 65

IK: 08

Photometric data

ZIP file