Scheda tecnica

emma70

1162821

FLOS

• Outdoor luminaire for installation on wall. • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent glass, silicone gaskets. 

Configurazioni disponibili Potenza nominale Flusso Emissione luminosa CCT CRI
1 x Alogena a tensione di rete senza riflettore 50 W 1200 lm 17 lm/W 2900 K 100
emma70

emma70 

Emissione luce 1 

1 x Alogena a tensione di rete senza riflettore 

Tipo di montaggio 

Montaggio a parete

Forma e Dimensioni 

Altezza: 70 mm

Diametro: 70 mm

Regolazione 

Fisso

Cablaggio / Dimming 

Potenza sistema: 50 W

Classe di protezione: I

Grado di protezione 

IP: 65

IK: 06

Photometric data

ZIP file