Pendant LED luminaire U-LINE-G-F...B...
Gear tray U-LINE-G-F… for direct and indirect beam luminaire. Set back from the carrier profile edge for mounting OS or MPS covers. Made of extruded aluminium, silver powder coated similar to RAL9006 with RIDI LED modules with longitudinal optics in extruded, UV-stabilised PMMA. Wide-beam light distribution for homogenous illumination of the cover. RIDI LED linear modules fitted with mid-power LEDs for maximum efficiency. LED modules in conformity with SELV for optimum thermal dissipation pressed over their full surface against the aluminium profile. Light colour 4000 Kelvin (840), other light colours on request. Colour rendering min Ra80. Gear trays can be mounted at any optional position in the mounting rail. Spring clips at the gear tray for fastening in the carrier profile. The LED modules are fitted with LEDs right up to the gear tray ends, eliminating any visible shadows when mounting in continuous rows. The luminous densities of the different lengths are almost identical, allowing the lengths to be combined at will when arranging the continuous luminaire run.
Electronic converter for LED, 230 Volt, 0/50-60 Hz, wired to electrical adapter with phase selection by means of sliding contact. Suitable for direct voltage operation and use in central battery systems.
Toolless mounting in the aluminium profile using spring clips, independently earthed for electrical safety.
Linear optics with wide beam light distribution made of clear UV-stabilised PMMA, integrated flush into the gear tray.
Transparent co-extruded plastic cover in clear UV-stabilised PMMA, with external microprism structure. Internal longitudinal fins for positioning made of impact-resistant UV-stabilised PMMA with opal light-impermeable coloration to prevent unwanted light reflection. (54 and 80 watts only in conjunction with U-LINE-GR or U-LINE-GTRI).