Fichier produit

vincenza led

10819634

FLOS

• Outdoor LED bollard light (no light pollution) • Configuration: die cast aluminium structure. EN AB-47100 alloy (low copper content). Extruded aluminium stem. • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Plastic sandblasted diffuser, neoprene gaskets. 

Type de source Puissance nominative du lampe Flux totale Efficacité lumineuse CCT CRI
LED 7,9 W 199 lm 25 lm/W 4000 K 80
vincenza led

vincenza led 

Surface lumineux 1 (integré) 

LED 

Type de montage 

Borne

Forme et dimensions 

Hauteur: 40 mm

Diamètre: 120 mm

Réglable 

Rigide

Électrique 

Puissance du système: 7,9 W

Classe de protection: III

Types de protection 

IP: 67

IK: 10

Fichier Photométrique

ZIP file