Recessed downlighter EBDQ-LED 340/...
Recessed downlighter with LED module, comprising reflector housing and gear tray. Covered LED module, transparent polycarbonate lens with slight inner matt effect. Outer ring of the lens with heavy matt effect to conceal the circuit board connection.
Electronic converter for LED, 220-240 Volt, 0/50-60 Hz and internal connector block 5x2.5mm².
Stable mounting frame in die-cast metal with toolless fixing clips for ceiling mounting. Mounting frame with fixture for toolless mounting of decorative frames and trims (accessories, to be ordered separately). Protection rating IP 44 when mounting in closed ceilings and using trim with laid-in panel.
Gear tray plate made of galvanised steel holds the control gear, the connector block with cable strain relief and the connecting cable to the LED module. Cover in heat-resistant polycarbonate clips into position
Standing fixing clip for clamping thickness from 0 to
40 mm. Other clamping thicknesses or fixing kits for special ceilings on request.
EBDQ-LED 340/... W
Edge length 340 mm. Fitted with RIDI LED module, colour rendering index at least Ra80, colour temperature 4000K (...-840), 1650, 3000 and 4000 lumen with passive heat sink.
DGDQ 340 W
Float glass disc, matt finish, with white decorative ring