Fichier produit

ABR-R1x120/25ND-OS-360M840

0650110

RIDI

Surface mounted luminaire ABR-R Design: Surface mounted luminaire for ceiling or pendant mounting, direct beam. Rigid luminaire housing with rounded longitudinal edge. High-grade scratch resistant white powder coating (similar to RAL9016). End caps with pre-stamped knock-outs for through wiring ZIDV... when continuous mounting. For RIDI-TUBE lamps (order separately). Lampholder system: RIDI-TUBE lamp base system with electrical and mechanical interface, proof against polarity reversal. Twist-clip mechanism for toolless lamp change corresponding to conventional fluorescent lamps. Mechanical and electrical fixture on the longitudinal sides inside the base. Electronic converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems. Mounting: Single or continuous mounting. For continuous mounting, no louvre with continuous optical effect. Ceiling mounting with supplied accessories, or pendant mounting with suitable fixing kits (see accessories). For pendant tube mounting with ZRP ..., one fixing bracket ZRP-BW must be ordered for each pendant tube. ABR-R ... OS, IP 40 Frame OS made of sectional aluminium with laid-in opal acrylic panel in PMMA. For RIDI-TUBE lamp, recommended cover: matt. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x LED 26 W 3600 lm 85 lm/W 4000 K 80
ABR-R1x120/25ND-OS-360M840

ABR-R1x120/25ND-OS-360M840 

Surface lumineux 1 

1 x LED 

Type de montage 

Plafonnier

Forme et dimensions 

Longueur: 1180 mm

Largeur: 131 mm

Hauteur: 60 mm

Réglable 

Rigide

Design 

Matériau: Mâte

Couleur du luminaire: Blanc

Électrique 

Puissance du système: 26 W

Tension: 230 V AC

Alimentation: ECG

Types de protection 

IP: 20

Étiquette: CE, ENEC, F

Fichier Photométrique

ZIP file