Recessed LED luminaire EBRME-LED
Recessed LED single luminaire for 600x600 modular ceilings. Protection IP54 rating on the room side, IP20 on the ceiling side. Rigid luminaire housing in white powder-coated galvanised steel, colour similar to RAL9016. Frame retained in the luminaire body by spring clips at four brackets, hinges down on both sides for automatic connection to the earth conductor. Seals to ensure compliance with the IP rating and Surrounding gasket glued in the luminaire rim to seal against the ceiling. LED modules formed as a flat board. Mid power LEDs for even illumination and maximum efficiency. LED drivers prefitted in luminaire housing. SELV-conforming operation of LED modules with less than 60 Volts. Colour rendering in index Ra >= 80, colour temperature 4000 Kelvin (840), other colour temperatures possible on request.
Electronic converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems.
Recessed mounting in differentrunking ceiling systems with suitable fixing kit, or lay-in mounting in exposed trunking ceiling systems and lay-in ceiling panels. For lay-in mounting, no additional fixing accessories are required.
EBRME-LED ... MPOR
Frame MPOR in extruded aluminium with laid-in opal acrylic microprism panel combined with panel in UV-stabilised PMMA. Opel panel in high-grade material with matt finish on both sides with high degree of transmission of 72%. Microprism panel with inward embossed prisms. Homogenous illumination without visible LED spots.