Fichier produit

RL2-400 PC/400 HIE/HSE (HSE)

0301719SI

RIDI

Reflector luminaire RL2 Design: Reflector luminaire with aluminium or plastic reflector, IP20 protection rating. IP40 when used with panel attachments. Suitable for lamps ranging from 150 W to 400 W high pressure discharge. Luminaire housing constructed of die cast aluminium with silver powder coating simlar to RAL 9006, with integrated retaining bracket for fastening accessories. Generously dimensioned cooling fins allow efficient heat dissipation even at high output levels. Magnetic VG: Low-loss magnetic ballast 230 Volt, 50 Hz with temperature fuse, flame and explosion-resistant capacitor and igniter with automatic cut-out. Electrical connection by means of an externally accessible 3-core plug connector. The connecting socket section is included in the delivery. Mounting: Wire pendant, tube pendant, chain and ceiling mounting are possible using appropriate accessories. Note: • Ignition cable contains silicone in luminaires for HIE, HST-CRI (SDWT), HSE and HIT. • Without visor attachment, the luminaires for HIE may only be operated using lamp types approved for open operation. Otherwise suitable visor attachments must be ordered (see accessories). • We recommend using lamps with frosted bulb in the luminaires for HIE lamps. RL2 ... PC Clear reflector PC made of UV-stabilised polycarbonate (PC) with light refracting external prisms. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x HSE 400W 400 W 47000 lm 97 lm/W 2819 K 99
RL2-400 PC/400 HIE/HSE (HSE)

RL2-400 PC/400 HIE/HSE (HSE) 

Surface lumineux 1 

1 x HSE 400W 

Type de montage 

Suspendu

Forme et dimensions 

Hauteur: 655 mm

Diamètre: 412 mm

Réglable 

Rigide

Design 

Couleur du luminaire: Gris argent

Électrique 

Puissance du système: 440 W

Types de protection 

IP: 20

Fichier Photométrique

ZIP file