Industrial luminaire IHLS
Surface-mounted industrial luminaire protection rating IP65 for ceiling, pendant or rail mounting. Rigid galvanised steel luminaire housing with scratch-proof white powder coated finish. Prefitted top mirror reflector in high-reflectance matt anodised super-purity aluminium with silver coating. Narrow frame in extruded aluminium with panel of impact-resistant UV stabilised acrylic (PMMA). Frame retained in the luminaire housing by spring clips and hinges downwards on both sides.
With electronic multiwatt ballast (MW-EVG), warm start lamps, 220-240 Volt, 0/50-60 Hz and internal connector block 5x2.5mm².
• Ceiling mounting without additional accessories using attached cap profiles or directly on the ceiling with accessory IHLS-DB …..
• Pendant mounting on chain or wire using attached cap profiles.
• Trunking mounting with fixing clips or standard fastenings.
Luminaires with EVG comply with the D symbol requirements according to new standard and FF according to the old standard.
Note "ball resistant":
RIDI luminaires with this sign are produced to the appropriate mechanical and photometric standards demanded for sports hall lighting.
They comply with ball-resistant safety requirements according to DIN 18032, part 3 and have been tested for that purpose by the MPA in Stuttgart.
IHLS ... W
Clear panel in PMMA, white louvre W made of white coated aluminium, reflector made of high-reflectance matt anodised super-purity aluminium with silver coating.