Fichier produit

paola

896114

FLOS

• Outdoor luminaire for installation on wall or on ceiling. • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent glass, pure aluminium optics, silicone gasket. • Glass fixed to the aluminium body through a robotic gluing system. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x Lampe fluocompacte 26 W 1800 lm 14 lm/W 3000 K 84
paola

paola 

Surface lumineux 1 

1 x Lampe fluocompacte 

Type de montage 

Plafonnier, En applique

Forme et dimensions 

Longueur: 250 mm

Largeur: 250 mm

Hauteur: 90 mm

Réglable 

Rigide

Électrique 

Puissance du système: 26 W

Classe de protection: I

Types de protection 

IP: 65

IK: 08

Fichier Photométrique

ZIP file