Fichier produit

SHL 424 W

0626726

RIDI

Sports hall luminaire SHL Design: Closed surface-mounted luminaire, ball-proof, includes lamp, for ceiling, pendant or trunking rail mounting. Rigid luminaire housing in white powder coated steel housing, colour similar to RAL 9016. Prefitted top mirror reflector in high reflectance super-purity aluminium with silver coating, matt anodized. Narrow frame in extruded sectional aluminium with panel in impact-resistant UV stabilised PMMA. Frame held in the housing with spring clips, hinges down on both sides. Prefitted lamp T16/...fitted, light colour 840. Electronic VG: • With dimmable electronic DALI ballast (EVG-DALI), warm start lamps, 220-240 Volt, 0/50-60 Hz and external connector block 5x2.5mm². • With electronic ballast (EVG), warm start lamps, 220-240 Volt, 0/50-60 Hz and external connector block 5x2.5mm². Mounting: Pendant and ceiling mounting using suitable fixing kits. Time-saving click mounting to trunking system TRAS without opening the luminaire. Ball resistant pendant mounting of the 1 and 2-lamp luminaires onto one length of trunking, 3 and 4-lamp luminaires onto two parallel lengths of trunking. With accessory SHL-DB, 0227922, the luminaires can be mounted directly on the ceiling or fastening surface without trunking. For this, the luminaire must be opened. Note: Luminaires with EVG comply with the D symbol requirements according to new standard and FF according to the old standard. Note "ball resistant": RIDI luminaires with this sign are produced to the appropriate mechanical and photometric standards demanded for sports hall lighting. They comply with ball-resistant safety requirements according to DIN 18032, part 3 and have been tested for that purpose by the MPA in Stuttgart. SHL ... W: Clear panel in PMMA, white louvre in white coated aluminium, reflector in high-reflectance matt anodized super-purity aluminium with silver coating, symmetric light distribution. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
4 x Lampe flourescente linéaire T16 24 W 1750 lm 38 lm/W 4000 K 80
SHL 424 W

SHL 424 W 

Surface lumineux 1 

4 x Lampe flourescente linéaire T16 

Type de montage 

Plafonnier

Forme et dimensions 

Longueur: 600 mm

Largeur: 600 mm

Hauteur: 80 mm

Réglable 

Rigide

Design 

Couleur du luminaire: Blanc

Électrique 

Puissance du système: 108 W

Types de protection 

IP: 40

Fichier Photométrique

ZIP file