Fichier produit

100W HST HPF

MWP

Nardeen

Applications Suitable to be used in: lobbies, entrances, corridors, circulation areas, stairs, governmental premises, fence walls, general application for indoor and outdoor lighting, ... Specifications Housing: Made of heavy duty die-cast aluminum, face frame is hinged and secured to the back box with two stainless steel screws. ½” tapped hole for securing conduit and installing a photocell (photocell are optional) A silicone gasket provides weather-seal. All metal parts pre-treated with a full degreasing and phosphate process, painted in stove enameled bronze baked epoxy polyester mix-powder. "Other color finishes upon request" Light Controller: Anodized pure aluminum reflector. Bowl of high impact and heat resistant Borosilicate glass diffuser, for wide spread distribution. Special rubber gasket for high protection. Mounting: Surface wall mounted. Control Gear: High Power Factor "HPF" ( E/G 90% ) Conventional Control Gear "CCG". Voltage / Frequency: 120v, 127v, 220v or 277v / 60Hz. 230v or 240v / 50Hz "Other Voltages upon request" Cable Entry: 1x22 mm dia. hole on back-side. Lamps: 50, 80 & 125 watt HME High Pressure Mercury Vapor E27, 70, 100 & 150 watt HIE/HIT Metal Halide E27. 50 & 70 watt HSE/HST High Pressure Sodium E27. 150 watt HSE/HST High Pressure Sodium E40 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x Sodium basse pression 100 W 9000 lm 42 lm/W 2000 K 25
100W HST HPF

100W HST HPF 

Surface lumineux 1 

1 x Sodium basse pression 

Type de montage 

En applique

Forme et dimensions 

Longueur: 267 mm

Largeur: 405 mm

Hauteur: 244 mm

Réglable 

Rigide

Électrique 

Puissance du système: 100 W

Types de protection 

IP: 65

Fichier Photométrique

ZIP file