Fichier produit

EBR-L 458/2000-840 T

0850115

RIDI

Recessed LED luminaire for sportshalls EBR-L Design: Recessed single luminaire, ball-proof. Includes RIDI-LED lamp L-TUBE-B. Luminaire housing in white powder coated steel, colour similar to RAL 9016. End caps with additional break-outs for cables or through wiring. Louvre fixed using fastening catches, hinges down on both sides with automatic connection to the earth conductor. Colour rendering in index Ra >= 80, colour temperature 4000 Kelvin (840) Lampholder system: Aluminium cap profile fixture on the luminaire side for efficient heat transfer, spring steel fixing clip on the lamp side for positive locking connection with cap profile. Locking on the longitudinal side by means of a catch. Easy removal through blue plastic component. Plug and socket electrical connection. Electronic converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems. Mounting: Prepared for integration in different ceiling systems using suitable fixing kits (accessory). For compensation of uneven ceilings, with 3 x ... Watt lamps or more, 6-point fixture is possible. Ball-proof ceiling surface mounting or pendant fixture of the 2, 3 and 4-lamp luminaires are only possible with 4-point fixture. When using trunking, 2 parallel rails are required for this. Note regarding wiring: EBR. 180, 280: all lamps are wired to L1. (180 with 1 device, 280 with 2 devices) EBR. 380: central lamp wired to L1, outer lamps to L2. (3 devices) EBR. 480: both central lamps wired to L1, outer lamps to L2. (4 devices) Other wiring arrangements are available on request. Note „ball resistant“: RIDI luminaires with this sign are produced to the appropriate mechanical and photometric standards demanded for sports hall lighting. They comply with ball-resistant safety requirements according to DIN 18032, part 3 and have been tested for that purpose by the MPA or VDE. EBR-L ... T Ball resistant to DIN 18032. White steel louvre with patented fastening catches in white coated steel, colour RIDI reflex white, similar to RAL9016, reinforced with circular rods. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
4 x LED 39 W 5000 lm 107 lm/W 4000 K 80
EBR-L 458/2000-840 T

EBR-L 458/2000-840 T 

Surface lumineux 1 

4 x LED 

Type de montage 

Encastré dans le plafond

Forme et dimensions 

Longueur: 1549 mm

Largeur: 624 mm

Hauteur: 90 mm

Réglable 

Rigide

Design 

Couleur du luminaire: Blanc

Électrique 

Puissance du système: 156 W

Types de protection 

IP: 20

Fichier Photométrique

ZIP file