Fichier produit

snell led

1016801

FLOS

• Recessed luminaire with lateral emission for outdoor installation in wall or pavement. • Configuration: die-cast aluminium structure . EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Moulded silicone gasket and 360° emitting glass lens fixed with silicone glue 

Type de source Puissance nominative du lampe Flux totale Efficacité lumineuse CCT CRI
LED 3,4 W 15 lm 4 lm/W 6000 K 70
snell led

snell led 

Surface lumineux 1 (integré) 

LED 

Type de montage 

Encastré de sol

Forme et dimensions 

Longueur: 75 mm

Largeur: 75 mm

Hauteur: 88 mm

Réglable 

Rigide

Électrique 

Puissance du système: 3,4 W

Classe de protection: III

Types de protection 

IP: 67

IK: 07

Fichier Photométrique

ZIP file