Fichier produit

maxiTommaso

881922

FLOS

• Outdoor luminaire for installation on wall. • Configuration: die-cast aluminium structure . EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered sandblasted glass; convex lens (MaxiTommaso); silicone gasket. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
1 x Iodures métalliques 150 W 11250 lm 25 lm/W 4200 K 98
maxiTommaso

maxiTommaso 

Surface lumineux 1 

1 x Iodures métalliques 

Type de montage 

En applique

Forme et dimensions 

Longueur: 360 mm

Largeur: 110 mm

Hauteur: 120 mm

Réglable 

Rigide

Électrique 

Puissance du système: 150 W

Classe de protection: I

Types de protection 

IP: 65

IK: 08

Fichier Photométrique

ZIP file