Fichier produit

VLG-FS236-5NDWS-700BQP840

1522285

RIDI

Continuous-row luminaire VLG-FS Design: LED gear tray made of sectional extruded aluminium, powder coated white (...WS-...), silver (...SI-...) or black (...SW-...) with enlarged light outlet surface. RIDI LED linear modules fitted with mid-power LEDs for outstanding efficiency. Operating in conformity with SELV, the boards are pressed over their entire surface onto the aluminium base profile for optimum heat dissipation. Soldered joints of the LED modules are tested for cavities and resistance to vibration and torsion in compliance with the most stringent quality standards. No thermal coupling between the LED modules and converters. Service life L80B50 at 50.000h. Linear optics with wide-beam light distribution made of transparent UV-stabilised PMMA integrated in the gear tray. Longitudinal glare reduction through cross-prism UV-stabilised PMMA panel. End caps in powder-coated steel for protection rating IP54. Optional clear panel insertable in the factory for simple removal of dirt deposits underneath (protection rating IP40). Spring steel clips for fixture of the gear tray in the trunking VLT. In conjunction with trunking VLT for the configuration of modular variable continuous lighting systems conforms to protection rating IP20. The gear trays can be mounted at any preferred location on the trunking. Electrical adapters for flexible take-off of the through wiring in the trunking with automatic PE conductor connection. Phase selection by means of sliding contact. Colour and optical coding for simple installation. Mechanical coding to prevent incorrect installation (polarity reversal). Where gear trays are variably positioned and where the electrical components come into contact with the trunking connector, mounting is only possible using trunking connector VLTV …-600. Colour rendering in index Ra >= 80, colour temperature 4000 Kelvin (840). Electronic converter for LED, 230 Volt, 0/50-60 Hz, wired to electrical adapter with phase selection by means of sliding contact. Suitable for direct voltage operation and use in central battery systems. VLG-FS ... BQP Linear optics with wide-beam light distribution made of transparent UV-stabilised PMMA integrated in the gear tray. Longitudinal glare reduction through cross-prism UV-stabilised PMMA panel. 

Ampoules disponibles Puissance nominative du lampe Flux lumineux de la source Efficacité lumineuse CCT CRI
2 x LED 25 W 3900 lm 129 lm/W 4000 K 80
VLG-FS236-5NDWS-700BQP840

VLG-FS236-5NDWS-700BQP840 

Surface lumineux 1 

2 x LED 

Type de montage 

Suspendu, Plafonnier

Forme et dimensions 

Longueur: 1186 mm

Largeur: 94 mm

Hauteur: 80 mm

Réglable 

Rigide

Électrique 

Puissance du système: 50 W

Types de protection 

IP: 40

Fichier Photométrique

ZIP file