Hoja de dato de productos

dorothy led



•LED bollard for installation outdoor • Configuration: die-cast aluminium structure. EN AB 47100 alloy (low copper content) • Double layer coating for high resistance to corrosion: The low copper. Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Transparent polycarbonate diffuser and expanded neoprene gaskets • Protection Rating: IP66 • In compliance with EN60598-1 standards • Class of insulation: I • Installation: the luminaire is equipped with two EPDM cable glands (8<ø<13mm cable). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. Direct screwing on a solid surface or ground fixation through base plate and bolts (to be ordered separately). 

Tipo de lámpara Potencia nominal de lámpara Flujo total Eficiencia luminosa CCT CRI
LED 11 W 1052 lm 96 lm/W 6000 K 80
dorothy led

dorothy led 

Emisión de luz 1 (integrada) 


Tipo de Montaje 


Forma y medidas 

Altura ajustable: 46 mm

Diámetro: 217 mm




Potencia: 11 W

Clases de aislamiento: I


IP: 66

IK: 07

Dato fotométrico

ZIP file