Hoja de dato de productos

paola led

8910057

Ares

Imagen de productos 1: paola led
Imagen de productos 1: paola led

Imagen de productos 1: paola led 

 

 

• Outdoor luminaire for installation on wall or on ceiling. • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered sandblasted glass, pure aluminium optics, silicone gasket. • Glass fixed to the aluminium body through a robotic gluing system. 

Tipo de lámpara Potencia nominal de lámpara Flujo total Eficiencia luminosa CCT CRI
LED 20 W 1298 lm 65 lm/W 6000 K 70
paola led

paola led 

Emisión de luz 1 (integrada) 

LED 

Tipo de Montaje 

Montaje en techo

Forma y medidas 

Longitud: 250 mm

Anchura: 250 mm

Altura ajustable: 90 mm

Ajustabilidad 

Fijo

Eléctrico 

Potencia: 20 W

Protección 

IP: 65

IK: 08