Hoja de dato de productos

yama led

531011

Ares

Imagen de productos 1: yama led
Imagen de productos 1: yama led

Imagen de productos 1: yama led 

 

 

• Outdoor cylindrical luminaire for installation on ceiling. • Configuration: extruded aluminium structure with die-cast aluminium fixing base and frame EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent glass mechanically glued to the frame and moulded silicone gasket 

Tipo de lámpara Potencia nominal de lámpara Flujo total Eficiencia luminosa CCT CRI
LED 15 W 1331 lm 89 lm/W 4000 K 80
yama led

yama led 

Emisión de luz 1 (integrada) 

LED 

Tipo de Montaje 

Montaje en techo

Forma y medidas 

Altura ajustable: 300 mm

Diámetro: 110 mm

Ajustabilidad 

Fijo

Eléctrico 

Potencia: 15 W

Protección 

IP: 65

IK: 05