Hoja de dato de productos

alfa led

505001

Ares

Imagen de productos 1: alfa led
Imagen de productos 1: alfa led

Imagen de productos 1: alfa led 

 

 

Round luminaire for outdoor installation on wall or ceiling. • Configuration: turned aluminium body ( EN AW 6060 alloy ). 316L stainless steel fixing bracket. • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. . • Methacrylate diffuser with silkscreen finishing, fixed to the body by silicone glue. 

Tipo de lámpara Potencia nominal de lámpara Flujo total Eficiencia luminosa CCT CRI
LED 2,5 W 65 lm 26 lm/W 6000 K 70
alfa led

alfa led 

Emisión de luz 1 (integrada) 

LED 

Tipo de Montaje 

Montaje en techo

Forma y medidas 

Altura ajustable: 25 mm

Diámetro: 118 mm

Ajustabilidad 

Fijo

Eléctrico 

Potencia: 2,5 W

Protección 

IP: 65

IK: 06