Hoja de dato de productos

perseo30 led

525101

Ares

Imagen de productos 1: perseo30 led
Imagen de productos 1: perseo30 led

Imagen de productos 1: perseo30 led 

 

 

• Outdoor luminaire for installation on wall or on pole. • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content) • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered extra-clear glass diffuser, mechanically glued to the structure, silicone gaskets. 

Tipo de lámpara Potencia nominal de lámpara Flujo total Eficiencia luminosa CCT CRI
LED 53 W 3448 lm 65 lm/W 6000 K 70
perseo30 led

perseo30 led 

Emisión de luz 1 (integrada) 

LED 

Tipo de Montaje 

Montaje en pared

Forma y medidas 

Longitud: 245 mm

Anchura: 75 mm

Altura ajustable: 330 mm

Ajustabilidad 

Reclinable

Eléctrico 

Potencia: 53 W

Protección 

IP: 65

IK: 07