Product data sheet

theta led

519001 narrow beam

FLOS

• Spotlight for outdoor installation on wall, ceiling or floor. • Configuration: turned aluminium body ( EN AW 6060 ). 316L stainless steel fixing bracket and methacrylate lens. Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Stainless steel cable gland. 

Lamp type Nominal lamp power Total flux Luminous efficacy CCT CRI
LED 3.4 W 71 lm 21 lm/W 6000 K 70
theta led

theta led 

Light output 1 (integrated) 

LED 

Mounting mode 

Wall mounted

Shape and measurements 

Height: 43 mm

Diameter: 43 mm

Adjustability 

Tiltable

Electric 

System power: 3.4 W

Appliance Class: III

Protection 

IP: 65

IK: 04

Photometric data

ZIP file