Product data sheet

isotta

400200

FLOS

• Round luminaire for outdoor installation on wall, ceiling or on dedicated post. • Configuration: die-cast aluminium structure . EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Self-extinguishing opal polycarbonate diffuser and moulded silicone gaskets. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
2 x Halogen low voltage lamp without reflector 60 W 820 lm 5 lm/W 2800 K 100
isotta

isotta 

Light output 1 

2 x Halogen low voltage lamp without reflector 

Mounting mode 

Ceiling mounted, Standing / Bollard

Shape and measurements 

Height: 100 mm

Diameter: 300 mm

Adjustability 

Fixed

Electric 

System power: 120 W

Appliance Class: I

Protection 

IP: 65

IK: 08

Photometric data

ZIP file