Product data sheet

alfia

827100

FLOS

• Recessed luminaire for outdoor installation in the wall. • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent glass glued to the frame and moulded silicone gaskets. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x Metal halide lamp 70 W 7000 lm 13 lm/W 3000 K 84
alfia

alfia 

Light output 1 

1 x Metal halide lamp 

Mounting mode 

Wall recessed

Shape and measurements 

Length: 250 mm

Width: 250 mm

Height: 92 mm

Adjustability 

Fixed

Electric 

System power: 70 W

Appliance Class: I

Protection 

IP: 54

IK: 08

Photometric data

ZIP file