Product data sheet

talia led

503007

FLOS

• Bollard light for outdoor installation. • Configuration: extruded aluminium structure • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Clipped Uv-stabilized opal polycarbonate diffuser. The LED module is housed in a sealed transparent polycarbonate cylinder with compensation valve. 

Lamp type Nominal lamp power Total flux Luminous efficacy CCT CRI
LED 7 W 73 lm 10 lm/W 6000 K 70
talia led

talia led 

Light output 1 (integrated) 

LED 

Mounting mode 

Standing / Bollard

Shape and measurements 

Length: 35 mm

Width: 120 mm

Height: 360 mm

Adjustability 

Fixed

Electric 

System power: 7 W

Appliance Class: II

Protection 

IP: 65

IK: 08

Photometric data

ZIP file