Product data sheet

miniFranco led

1610012

FLOS

Outdoor luminaire for installation on wall or on pole. Configuration: die-cast aluminium structure. EN AB-47100 (low copper content) Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. Pure aluminium optics, tempered extra-clear glass diffuser, silicone gaskets. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x LED 19.2 W 1865 lm 82 lm/W 6000 K 70
miniFranco led

miniFranco led 

Light output 1 

1 x LED 

Mounting mode 

Wall mounted, Pole top mounted

Shape and measurements 

Length: 175 mm

Width: 106 mm

Height: 245 mm

Adjustability 

Tiltable

Electric 

System power: 20 W

Appliance Class: I

Protection 

IP: 65

IK: 07

Photometric data

ZIP file