Product data sheet

yama led

531025

FLOS

• Outdoor cylindrical luminaire for installation on ceiling. • Configuration: extruded aluminium structure with die-cast aluminium fixing base and frame EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent glass mechanically glued to the frame and moulded silicone gasket 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x LED 16.5 W 1681 lm 81 lm/W 4000 K 80
yama led

yama led 

Light output 1 

1 x LED 

Mounting mode 

Ceiling mounted

Shape and measurements 

Height: 300 mm

Diameter: 150 mm

Adjustability 

Fixed

Electric 

System power: 20 W

Appliance Class: I

Protection 

IP: 65

IK: 07

Photometric data

ZIP file