Product data sheet

memi

496000

FLOS

• Outdoor luminaire for installation on wall or on dedicated post. • Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered sandblasted glass, silicone gaskets. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
2 x Compact fluorescent lamp 18 W 1200 lm 12 lm/W 3000 K 84
memi

memi 

Light output 1 

2 x Compact fluorescent lamp 

Mounting mode 

Wall mounted, Standing / Bollard

Shape and measurements 

Length: 300 mm

Width: 150 mm

Height: 200 mm

Adjustability 

Fixed

Electric 

System power: 36 W

Appliance Class: I

Protection 

IP: 65

IK: 07

Photometric data

ZIP file