Product data sheet

maxi melrie

486121

FLOS

• Outdoor luminaire for surface installation on wall • Configuration: polycarbonate structure and die-cast aluminium cover, diecast aluminium base (MaxiMelrie) EN AB-47100 alloy (low copper content). • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Expanded silicone gaskets. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x Compact fluorescent lamp 26 W 1800 lm 9 lm/W 3000 K 84
maxi melrie

maxi melrie 

Light output 1 

1 x Compact fluorescent lamp 

Mounting mode 

Wall mounted

Shape and measurements 

Length: 280 mm

Width: 140 mm

Height: 120 mm

Adjustability 

Fixed

Electric 

System power: 26 W

Protection 

IP: 65

Photometric data

ZIP file