Product data sheet

vincenza led

10819634

FLOS

• Outdoor LED bollard light (no light pollution) • Configuration: die cast aluminium structure. EN AB-47100 alloy (low copper content). Extruded aluminium stem. • Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Plastic sandblasted diffuser, neoprene gaskets. 

Lamp type Nominal lamp power Total flux Luminous efficacy CCT CRI
LED 7.9 W 199 lm 25 lm/W 4000 K 80
vincenza led

vincenza led 

Light output 1 (integrated) 

LED 

Mounting mode 

Standing / Bollard

Shape and measurements 

Height: 1.57 in

Diameter: 4.72 in

Adjustability 

Fixed

Electric 

System power: 7.9 W

Appliance Class: III

Protection 

IP: 67

IK: 10

Photometric data

ZIP file