Product data sheet

ginevra

1113500

FLOS

• Outdoor/indoor floor lamp. • Configuration: vibrated and sandblasted concrete footing, extruded aluminium pole and white sanblasted polyethylene diffuser for a perfect light emission. • Double layer coating for high resistance to corrosion: The aluminium parts are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x Halogen low voltage lamp without reflector 100 W 1500 lm 40 lm/W 2800 K 100
1 x Metal halide lamp 35 W 3300 lm 88 lm/W 3000 K 81
ginevra

ginevra 

Light output 1 

1 x Halogen low voltage lamp without reflector 

ginevra

ginevra 

Light output 1 

1 x Metal halide lamp 

Mounting mode 

Standing / Bollard, Floor mounted

Shape and measurements 

Height: 23.62 in

Diameter: 19.69 in

Adjustability 

Fixed

Electric 

System power: 35 W

Appliance Class: I

Protection 

IP: 65

Photometric data

ZIP file