Product data sheet

silvana

362100

FLOS

• Outdoor luminaire for installation on ceiling. • Configuration: die-cast aluminium fixing base and frames, EN AB47100 alloy (low copper content). Extruded aluminium body. • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent glass and silicone gasket 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x Compact fluorescent lamp 42 W 3200 lm 18 lm/W 3000 K 82
silvana

silvana 

Light output 1 

1 x Compact fluorescent lamp 

Mounting mode 

Ceiling mounted

Shape and measurements 

Length: 5.91 in

Width: 5.91 in

Height: 11.42 in

Adjustability 

Fixed

Electric 

System power: 42 W

Appliance Class: I

Protection 

IP: 65

IK: 08

Photometric data

ZIP file