Product data sheet

Alu-Poller Lamelle



Product image 1: Alu-Poller Lamelle
Product image 1: Alu-Poller Lamelle

Product image 1: Alu-Poller Lamelle 



Series: Alu-Poller Lamelle Type of protection: IP54 Protection class: II Nominal tension(s): 0 - 250V / 0 - 60Hz Post: Ø108mm, aluminium. Post top flange and Base plate: die-cast aluminium, powder-coated. Diffuser: opal glass, satin finish. Cover and lamellae: plastic. Power supply cable runs through post to removable installation unit. Base plate: Ø185mm, three mounting holes d10.5mm x 30°, pitch circle for holes D150mm. Post luminaire with design integrated movement sensor and light sensitive switch. Light level sensing and ON TIME duration can be adjusted separately. Switching rating: max. 1,000W (ohmic load). Timer: adjustable ON TIME from 6 sec. to 10 min. Light level sensing: 30 Lux to daylight (adjustable). Detection angle: horizontally: 110°, vertically 25°. Colour: silver metallic Type of mounting: post Lamp: A60 15W, 25W, 40W, 60W, E27 D: 122mm H: 985mm Safety mark: F-mark 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x Halogen low voltage lamp without reflector 42 W 630 lm 1 lm/W 3000 K 99

Mounting mode 

Standing / Bollard, Pole integrated

Shape and measurements 

Height: 30.91 in

Diameter: 4.80 in




System power: 42 W


IP: 54

IK: 07