LED recessed luminaire Design: LED recessed luminaire for modular ceilings 600 x 600. Stable luminaire housing made of white powder coated steel, colour similar to RAL9016. Frameless diffuser clips into the luminaire housing without the use of tools. LED modules formed as a flat board. Mid power LEDs for even illumination and maximum efficiency.LED drivers prefitted in luminaire housing. Operation at safety extra-low voltage below 60 Volt (SELV-conformity). Protection rating IP40 on the room side and IP20 on the ceiling side. Colour rendering in index Ra >= 80, colour temperature 3000 Kelvin (830), 4000 Kelvin (840), 3000-6500 Kelvin (TW 830-865) Electronic converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems. Mounting: Mounting in different ceiling systems with the relevant fixing kit (accessory) or lay-in mounting in ceiling systems with visible support rails and laid-in ceiling panels. For lay-in mounting, no additional fixing accessories are required. ARKTIK-ME-S-LED... Diffuser direct and indirect beam with ceiling brightening, completely made of opal satinised UV-stabilised polycarbonate, translucent, with centrally mounted microprism panel made of UV-stabilised polycarbonate. LEDs in the prism area are visible as spots.
Available equipment | Nominal lamp power | Lamp flux | Luminous efficacy | CCT | CRI |
---|---|---|---|---|---|
2 x LED | 16 W | 2600 lm | 138 lm/W | 4000 K | 80 |
Mounting mode
Ceiling recessed
Shape and measurements
Length: 23.50 in
Width: 23.50 in
Height: 3.23 in
Adjustability
Fixed
Design
Color of housing: White
Electric
System power: 32 W
Protection
IP: 20
Photometric data
ZIP file