Product data sheet

emma110

1176612

FLOS

• Outdoor luminaire for installation on wall. • Configuration: die-cast aluminium fixing base and frames. EN AB-47100 alloy (low copper content), extruded aluminium body. • Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent glass, silicone gaskets. 

Available equipment Nominal lamp power Lamp flux Luminous efficacy CCT CRI
1 x Metal halide lamp 20 W 1700 lm 56 lm/W 3000 K 81
emma110

emma110 

Light output 1 

1 x Metal halide lamp 

Mounting mode 

Wall mounted

Shape and measurements 

Height: 4.33 in

Diameter: 4.33 in

Adjustability 

Fixed

Electric 

System power: 20 W

Appliance Class: I

Protection 

IP: 65

IK: 05

Photometric data

ZIP file